Centurion Access Systems

Centurion Plus B125

The system has been developed as a no concrete surround and frameless quick build structure that is extremely quick to install as well as cost effective resulting in significantly lower labour, plant and road closure costs.

Centurion Plus requires no timber bracing and no waiting time for the concrete to gain its strength. The contractor simply excavates the required pit area, drops in the sections, backfill and block pave or flags right up to the top of the chamber.


FEATURES AND BENEFITS:
  • Quick to install
  • Complies to H&S requirements for one man lift
  • Fully assembled or flat packed for transport cost savings
  • Quick knock out system for duct entry
  • Locking plate for security
  • No frame required
  • Pre-drilled duct entries available to customer specification
  • Telemetry readings can be made directly through the lids
  • Rebated design enables B125 composite cover to fit flush with chamber
Product Codes Sizes
9490350 290x275x150 Centurion Plus Standard Ring Section
9490407 290x275x150 Centurion Plus Top Ring Section
9490354  450x450x150 Centurion Plus Standard Ring Section
9490409 450x450x150 Centurion Plus Top Ring Section
9490358  600x600x150 Centurion Plus Standard Ring Section
9490411 600x600x150 Centurion Plus Top Ring Section
  Top Sections
9490408 450x300
9490410 600x450
9490344 900x450
9490345 900x600
9490346 1200x450
9490347 1200x600
  Risers
9490352 450x300
9490356 600x450
9490360 900x450
9490362 900x600
9490365 1200x450
9490367 1200x600

 


 

Access Chamber System

The market leader in Access Systems for Street Lighting, Traffic Signals and the Communications industry, the Centurion Access System was successfully developed for acceptance by the water, rail and CCTV sectors.

Civils and Lintels, together with RDT Chamber Solutions, have developed a groundbreaking, freestanding, stackable chamber system complete with an integral cover, 150mm deep sections, removing the need for a costly, traditional steel or ductile iron frame.

FEATURES:
  • No need for traditional galvanised or ductile frame support
  • No need for concrete thus eliminating cost and time during installation
  • Rebated chamber design enables B125 cover to fit flush with chamber
  • Decorative concrete, block paviors, slabs etc can be laid directly alongside the chamber creating a polished, surface level finish
  • Complete system manufactured from mixture of thermoset moulding compounds
  • Central removable beam where necessary
BENEFITS:
  • Complies with health & safety requirements - ‘one or two man lift’
  • Much stronger than typical thermoplastive alternatives
  • Resistant against aggressive soil conditions
  • Performs against diverse temperature changes -40oC to +140oC, will not soften by heat or brittle by frost
  • Duct entries are knock-outs - no need for drilling
  • Supplied flat-pack for transport cost savings or fully assembled if required
  • Composite covers have anti-slip design and are supplied locking as standard
  • Telemetry reading can be made directly through the composite cover
APPLICATIONS:
  • Street Lighting
  • Traffic Signals
  • CCTV
  • Telecoms
  • Water
  • Gas

 
SIZES AVAILABLE:

 

Size No. of punch outs per layer Load in
290 x 275 x 150mm 3 B125
450 x 300 x 150mm 3 B125
450 x 450 x 150mm 3 B125
600 x 450 x 150mm 4 B125
600 x 600 x 150mm 4 B125
900 x 450 x 150mm 4 B125
900 x 600 x 150mm 4 B125
1200 x 450 x 150mm 4 B125
1200 x 600 x 150mm 4 B125

 


RapidStackTM D400 Loading Chamber

 

 

RapidStack is a GRP access chamber developed for use in a variety of applications including Highways,Traffic Signals/ Street Lighting,
Rail and Water. Strong and lightweight it achieves D400 compressive loadings, with standard sizes that conform to HSE regulation for ‘one man lift’.
These high quality, fast-build chambers are an alternative product to the traditional brick-built and other plastic manholes.

 

 

FEATURES AND BENEFITS

Unique design of interchangeable sections - Depth in multiples of 150mm

  • Wide range of sizes available - from 450mm to 2800m
  • Fully assembled or flat-packed D400 loadings
  • Tested and certified to perform vertical load requirements specified
  • in pr EN 124 and BS EN124:1994
  • Full range of covers and frames to suit application
  • Extremely quick to install
  • No internal bracing required during initial installation
  • Full range of chamber furniture and cable management kit available
  • Pre-drilled duct entries available to customer specification
  • Technical support available
     

RapidStackTM E600 Loading Chambers

 

RapidStack E600 chambers are designed to suit specific heavy duty applications. These chambers are vertically tested and certified to conform to BE EN124: 1994. The RapidStack chambers are manufactured using GRP materials and are safe, lightweight, cost effective and quick and easy to install. The product can be delivered fully assembled or flat packed saving on transport and storage costs. 
The range now covers loadings from B125 (12.5 tonnes) to E600 (60 tonnes). The RapidSTACKTM chamber can be delivered to site fully assembled, or flat-packed which saves on transport and storage costs. MCL’s unique RapidSTACKTM chambers are manufactured using GRP materials, are safe, lightweight, cost-effective and quick and easy to install.

 

 

FEATURES AND BENEFITS
  • Unique design of interchangeable sections
  • Fully assembled or flat-packed for transport cost savings
  • Full range of cover and frames available to suit application
  • Full range of chamber furniture and cable management kits available
  • Wide range of sizes available from 600mm to 2500mm
  • E600 loading
  • Extremely quick to install
  • Pre-drilled duct entries available to customer specification
  • Depth in multiples of 150mm stackable system
  • Tested to vertical load requirements specified in pr-EN 124 and BS EN124:1994
  • No internal bracing required during initial installation
  • Technical support available
     

RapidStackTM Fire Resistant Access Chambers

 

The RapidStackTM Fire Resistant Access Chamber has been developed for the gas and electricity sectors, as there was a necessity to produce a range of chambers that are fire resistant to BS476 part & class 2 (surface spread of flames) Chambers are tested and certified to perform to the vertical load requirements specified in pr-EN 124 and BS EN124:1994 and the total range of covers loading from B125 (12.5 tonnes) to D400 (40 tonnes). The RapidStackTM Chamber can be delivered to site fully assembled, or flat-packed which saves on transport and storage costs. The unique RapidStackTM chambers are manufactured using GRP materials, are safe, lightweight, cost-effective and quick and easy to install.

 

FEATURES AND BENEFITS
  • Unique design of interchangeable sections
  • Fully assembled or flat-packed for transport cost savings
  • Full range of cover and frames available to suit application
  • Full range of chamber furniture and cable management kits available
  • Wide range of sizes available from 450mm to 2500mm
  • D400 loading
  • Extremely quick to install
  • Pre-drilled duct entries available to customer specification
  • Depth in multiples of 150mm stackable system
  • Tested to vertical load requirements Specified in pr-EN 124 and BS EN124:1994
  • No internal bracing required during initial installation
  • Technical support available

 

 

Need Help?

Want to know more?
Need advice about a product or service?

Our sales team are happy to help. 
Complete the form and we will be in touch.

Incorrect, please try again
Enter the words above: Type what you hear:

 

Open your trade account with us today

Find your local PDM branch and directions

Download useful files and guides